Red-D-Arc EXTREME 360 Manuel de l'opérateur télécharger pdf (Page 21)

LN-25

C-1

OPTIONAL ACCESSORIES

ELECTRIC SHOCK can kill.

• Do not operate with covers

removed.

• Turn Welding power source

off before installing or servic-

ing.

• Do not touch electrically hot

parts.

• Turn the input power to the

welding power source off at

the fuse box before working

in the terminal strip.

•Only qualified personnel

should install, use or ser-

vice this equipment.

K430-2 GAS SOLENOID KIT

(For Codes above 10500 only)

(Factory Installed on K446 and K449 Models)

The kit permits the LN-25 to be used for Gas

Metal Arc Welding (GMAW) processes with a

GMA gun cable.

The kit can be used with or without a Remote Output

Control option installed in the LN-25 and provides

flow of shielding gas:

1. With wire feed, when the gun trigger is closed.

2. Without wire feed, when the kit’s Purge button

(located beneath the gas inlet fitting) is pressed.

NOTE: Always shut off the valve at the gas cylinder

before making any gas connections to the LN-25.

User must provide a supply of shielding gas, a pres-

sure regulator, a flow control valve and a hose from

the flow valve to the gas inlet fitting of the LN-25.

Install by connecting a supply hose from the gas flow

valve outlet to the

⁄8-18 female inert gas fitting on the

back panel of the LN-25 case.

The LN-25 can be used with any shielding gas

recommended in the electrode’s product literature at

a maximum pressure of 60 psi (4.1 bar). This may

include gases such as Argon, Helium, Nitrogen and

blended gasses such as Ar-He, Ar-N

, Ar-O

, Ar-

, CO

, Ar-CO

-O

CYLINDER may explode if

damaged.

•Keep cylinder upright and

chained to support.

• Keep cylinder away from areas where it may be

damaged.

• Never lift welder with cylinder attached.

• Never allow welding electrode to touch cylinder.

• Keep cylinder away from welding or other live

electrical circuits.

• See American National Standard Z-49.1, “Safety in Welding

and Cutting” published by the American Welding Society.

See GMA Gun Cable Gas Connection.

Installation instructions (M19154) are included with the

kit.

K577-1 REAR HANDLE KIT

(For LN-25 model codes above 9383)

The fold-down handle mounts to the rear of the LN25

case per the Installation Instructions (M16567)

shipped with the kit.

This handle provides a means to also carry the LN25

in the vertical position, especially convenient for pass-

ing the unit through a manhole.

K363P READI-REEL ADAPTER KIT

Adapts Lincoln Redi-Reel coils of electrode 30 lb. (14

kg) and 22 lb. (10 kg) to a 2” (51mm) spindle. Durable

molded plastic one piece construction. Designed for

easy loading; adapter remains on spindle for quick

changeover.

WARNING

ACCESSORIES

WARNING

LN-25 MODELS-K449-2

KIT NO. K430-2: Solenoid Kit

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Red-D-Arc EXTREME 360 Manuel de l'opérateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage Red-D-Arc EXTREME 360