Red-D-Arc EXTREME 360 Spécifications télécharger pdf (Page 6)

installed following the manufacturer´s instructions.The earth has to be connected!

Cord plug connections:

Cable Pin International

Brown Live L

Light blue Neutral N

Yellow/Green Earth

This device falls under protection class I.Therefore the ArcPower 360 has to be con-

nected to a mains socket outlet with a protective earthing connection.

4.2.Mounting the ArcPower 360

The ArcPower 360 should be be placed on a non-f lammable f lat surface in any orientation and xed by the

6 screws.There are 6 mounting holes of diameter 5 mm in housing of the driver. Ensure that instalation place

is enough ventilated.

4.3.Conection cables

1.The adapter cable RJ45/XLR connects the ArcPower 360 to the DMX controller.If your DMX controller has

RJ45 socket for DMX output,use RJ45 patch cable for connection with the ArcPower 360.

RJ45 plug DMX 512 XLR plug (male)

View facing pins Front view of the plug

Pin 1: Not used Pin 1: GND

Pin 2: Not used Pin 2: Data -

Pin 3: Not used Pin 3: Data +

Pin 4: Not used Pin 4: Not used

Pin 5: Not used Pin 5: Not used

Pin 6: Data +

Pin 7: Data -

Pin 8: GND

Flat surface

Mounting holes

Screws

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

Red-D-Arc EXTREME 360 Spécifications Page 6